How to Calculate How Much Siding You Need (Step-by-Step)

Step 1: Break Your House Into Geometric Shapes

Houses are rarely single continuous rectangles. To calculate material accurately, walk around the exterior with a 100-foot tape measure (or laser measure) and break every wall elevation into two basic geometric shapes:

• Rectangles: The main body of every wall from the foundation up to the eave line.
• Triangles (Gables): The triangular wall sections extending above the eave line up into the roof peak.
• Dormers & Bump-Outs: Separate smaller rectangular and triangular sections.

Step 2: Calculate Rectangular Wall Square Footage

For each wall, multiply the wall width (length) by the eave height:

Wall Area (sq ft) = Width (ft) × Height (ft)

For example, a home with two 40-foot walls and two 30-foot walls, all with a 10-foot eave height:

• Front & Back: 2 walls × (40 ft × 10 ft) = 800 sq ft
• Left & Right: 2 walls × (30 ft × 10 ft) = 600 sq ft
• Total Rectangular Wall Area: 1,400 sq ft

Step 3: Calculate Triangular Gable End Areas

Gable walls have a triangular peak above the eave height. The area of a triangle is half the base multiplied by the peak height:

Gable Area (sq ft) = 0.5 × Base Width (ft) × Peak Height (ft)

If the two 30-foot side walls have gable ends with an 8-foot peak above the eave line:

• Each Gable: 0.5 × 30 ft × 8 ft = 120 sq ft
• Both Gables: 2 × 120 sq ft = 240 sq ft

Step 4: Deduct Windows, Doors, and Large Openings

Measure all windows and exterior doors from the outer brickmold/casing:

Step 5: Apply Waste Factor & Convert to Siding Squares

Calculate your net square footage and add a realistic waste factor (10% standard, or 12-15% for multi-gable homes):

• Net Area: (1,400 + 240) - 253 = 1,387 sq ft
• Gross Area with 10% Waste: 1,387 × 1.10 = 1,525.7 sq ft
• Siding Squares Needed: 1,525.7 ÷ 100 = 15.3 Squares